Categories: Land RoverLR3 / DIscovery 3

Replace LR3 Tail Light Bulbs

This video shows how to remove the rear light on a Land Rover LR3 so you can change the bulbs or replace the tail light. The only tool you need for replacement of a brake light bulb, turn signal bulb or tail light on the LR3 is a Philips screwdriver.

The tail light on the LR3 is only held on by 2 screws and to snap fittings. To remove the light, remove the two screws and then just pull the light straight back. The bulb holders are removed by twisting counter-clockwise and then pulled out of the light housing.

The light bulbs in the tail light of an LR3:

Turn Signal: 7506 http://amzn.to/2jfbSQy
Back Up / Reverse Lights: 7506 http://amzn.to/2jfbSQy
Stop Light / Brake Light: 7528 http://amzn.to/2jfVbE6
Tail Light Bulb: 7528 http://amzn.to/2jfVbE6

Do you need to find another light for your LR3? Here is a tool that will help you identify the light bulbs: https://www.osram-americas.com/en-us/applications/automotive-lighting-systems/Pages/lrgmain.aspx

Zip Zap DIY