Honda Element & CR-V Spark Plug Change with Tool List

Changing the spark plugs on a Honda CR-V or Honda Element is very easy and the same process for both vehicles.

The spark plugs are located on the top of the 2.4l engine and underneath a cover that is held on by 10mm nuts.

Each Plug has a coil pack and the coil packs are held down by 10mm screws.

After you have removed the coil pack you will be able to remove the spark plug with the 5/8 socket, and then pull them out of the engine using your spark plug socket.

When installing the spark plugs, be careful to not exert too much force, the torque spec is 13ft lbs, this is not much.

A spark plug on the Element or CR-V can cost as little as just under $3, like this one http://amzn.to/1VwaOnD

If you wanted to replace the Honda ignition coil packs while you are doing the plugs, a whole set costs just under $70 http://amzn.to/1RN0xwu

Honda Element Spark Plug Change Tool List:

  • 3/8 Drive Ratchet
  • 3/8 Ratchet Long Extension
  • 10mm Socket
  • 5/8 Socket
  • 5/8 Spark Plug Socket
Zip Zap DIY

Share
Published by
Zip Zap DIY

Recent Posts

Milwaukee M18 Fuel Impact Driver

BUY ON AMAZON The Milwaukee M18 Fuel Impact Driver is a game-changer in my toolkit.…

3 days ago

Land Rover Battery Key Replacement / Range Rover Key Battery

This video shows how to replace the battery in a Land Rover Key Fob. Replacing…

3 years ago

Headlight Ballast Replacement

New Headlight Bulb not Working? How to Replace a XENON / HID Headlight Ballast. You've…

3 years ago

IKEA UTRUSTA Hinge & Door Damper Install

How to install the IKEA UTRUSTA hinge on IKEA kitchen cabinets.Hinge to Door:There are no…

4 years ago

Clean or Replace Boxster Mass Air Flow Sensor

Clean or Replace the Mass Airflow Sensor on a Porsche Boxster UPDATE: March 2016, I needed…

4 years ago